High-End Industrial Humidity / Temperature Transmitter
 High Humidity and Chemical Applications
Series EE32 / EE33

• Working range: 0 - 100 %RH
• Temperature range: -40 to +180 °C (-40 to 356 °F)
• Housing: Metal or Polycarbonate
• Unique monolithic measuring cell
• Measurement near condensation (separate T-probe)
• Purge of chemical contamination
• Full temperature compensation
• Pressure tight version up 100 bar (1450 psi)
• Alarm output and local display optional
• Interchangeable and remote sensor probe up to 20 m (65 feet)
• Analogue outputs free selectable and scalable
• RS 232 interface for configuration
• Dew point, absolute humidity and other calculated values *)
• Data output via RS232 serial interface *)
• RS485 and Ethernet network capability *)
• Calibrated against NIST traceable factory standards

      *) Series EE33
 

Multifunctional Industrial Humidity / Temperature Transmitter
Humidity / Dewpoint / Wet Bulb / Mixing Ratio......
Series EE29 / EE31

• Working range: 0 - 100 %RH
• Temperature range: -40 to +180 °C (-40 to 356 °F)
• Housing: Metal or Polycarbonate
• Full temperature compensation
• Version with 5 mm (0.2 inch) remote probe
• Pressure tight version up 15 bar (215 psi)
• Alarm output and local display optional
• Clean room wall mount version with rear cable entry
• Interchangeable and remote sensor probe up to 20 m (65 feet)
• Analogue outputs free selectable and scalable
• RS 232 interface for configuration
• Dew point, absolute humidity and other calculated values *)
• Data output via RS232 serial interface *)
• RS485 and Ethernet network capability *)
• Calibrated against NIST traceable factory standards

       *) Series EE31
 

Economical Industrial Humidity / Temperature Transmitter
Dew and Frost Point Temperature
Series EE23

• Working range: 0 - 100 %RH
• Temperature range: -40 to +120 °C (-40 to 248 °F)
• Housing: Metal or Polycarbonate
• Dewpoint and frost point temperature calculation
• 1 %RH accuracy over 0 - 90 %RH optional                                   
• On site calibration
• Remote sensor probe up to 20 m (65 feet)
• Alarm output and local display optional
• Meteorological version with radiation shield
• Version with 5 mm (0.2 inch) remote probe
• Clean room wall mount version with rear cable entry
• Calibrated against NIST traceable factory standards

Digital Industrial Humidity / Temperature Transmitter
Interchangeable Probes
Series EE22

• Working range: 0 - 100 %RH
• Temperature range: -40 to +80 °C (-40 to 176 °F)
• Housing: Metal or Polycarbonate
• Interchangeable probes without recalibration
• Calibration data stored in sensor probes
• 1 RH / T probe or 2 separate probes for RH and T
• 2 %RH accuracy over 0 - 90 %RH
• On site calibration
• Remote sensor probe up to 10 m (32 feet)
• Alarm output and local display optional
• Clean room wall mount version with rear cable entry
• Calibrated against NIST traceable factory standards

Industrial Humidity / Temperature Transmitter
Intrinsically Safe Applications
Series EE30-EX

• Working range: 0 - 100 %RH
• Temperature range: -40 to +180 °C (-40 to 356 °F)
• Intrinsically Safe version II (1) G [EEx ia] IIC / II 1/2 G EEx ia IIC T6
• 1 %RH accuracy over 0 - 90 %RH
• Full temperature compensation
• RS 232 interface for configuration / monitoring, incl. config. software
• Analogue outputs free selectable and scalable
• Dew point, absolute humidity and other calculation functions
• Pressure tight version up 15 bar (215 psi)
• Remote sensor probe up to 10 m (32 feet)
• Optional local display
• Calibrated against NIST traceable factory standards