bannerright

News and Updates

seriesEE06-0 preliminary small May
2013

As of July 1, 2013, there will be some changes within the EE06x family. The new EE060 will be introduced as a follow-up product to the EE06. The EE060 will feature fully encapsulated electronics and the HCT01 sensor element. In addition to the EE06 functionality, the EE060 will be available with a threaded connector or an integrated cable. The EE060 will be available with 0-1V, 0-5V and 0-10V output. The EE060 will have a black design compared to the grey EE06. Be aware that the probe length of the EE060 will not be the same as EE06. There will be no passive temperature measurement option within the scope of EE060.

The EE061 will be switched to a black design in order to fit to the new EE060. All measurement parameters of the EE061 will stay unchanged. Orders for the EE06-FT will be accepted until 06/21/13!!!
EE300Ex small March 2013

The EE300Ex humidity/temperature transmitter ensures safe operation in explosion hazard areas and fulfils the requirements of the ATEX Directives on intrinsically safe operating equipment. The device can therefore be used both in gas and dust explosion hazard areas.

In the same way as humidity measurement in air, the EE300Ex can also be used for moisture measurement in oil. The moisture content of an oil can be issued as absolute in [ppm] or relative as water activity [aw].
KF170 small January 2013 The KATflow 170 is Katronic latest development in ultrasonic flowmeters. The KATflow 170 comes in an explosion-proof field housing, pipe mounted and approved according to ATEX II 2G Ex de IIB T6. For pipe sizes from 10 mm up to 3000 mm.
ee241 242 small January 2013 The HVAC wireless transmitter series 240 allows for the measurement of humidity, temperature and carbon dioxide (CO2). A base station can be set up for point-to-point measurement or for 500 transmitters forming a network. Transmitters accept several different types of sensors. Routers are available to enhance the network capability. A versatile indoor wall mount transmitter completes the wireless system series 240
multigauge-3000 November 2012 JLC International introduces a new line of products, the Ultrasonic Thickness Gauges for surface and underwater applications. The Multigauges are equipped with interchangeable soft faced single crystal probes with multiple echo measurement. Each gauge immediately recognized the probe that is connected to it. The Ultrasonic Thickness Gauges are available as a handheld, a handsfree version with belt clip, a handheld for underwater application and a ROV mountable version for depths up to 4000 meter (13,100 feet). All gauges come in a complete kit with the most versatile probe of 13 mm (1/2") 2.25 MHz. These Tritex NDT products are simple to operate, highly accurate and very robust.
multigauge 5600 MK2 small November 2012 JLC International introduces a new line of products, the Ultrasonic Thickness Gauges for surface and underwater applications. The Multigauges are equipped with interchangeable soft faced single crystal probes with multiple echo measurement. Each gauge immediately recognized the probe that is connected to it. The Ultrasonic Thickness Gauges are available as a handheld, a handsfree version with belt clip, a handheld for underwater application and a ROV mountable version for depths up to 4000 meter (13,100 feet). All gauges come in a complete kit with the most versatile probe of 13 mm (1/2") 2.25 MHz. These Tritex NDT products are simple to operate, highly accurate and very robust.
KF100 small August 2012  The KATflow 100 is the low-cost version of the well-known Katronic ULtrasonic Clamp-on flowmeter line. One channel, analogue outputs and display. For pipe size van 10 up to 3000 mm.