|
|
|
News and Updates |
|
|
|
|
|
 |
June
2010 |
The Atrato Series 700 is a real
break-through in flowmeter
technology. The Atrato Series
700 is a new high-accuracy, low-cost
inline ultrasonic flowmeter. The
Atrato Series 700 is a clean bore,
direct through meter without an
interrupted flow path, which uses
ultrasonic technology. It can handle
flows from laminar to turbulent and
is therefore largely immune from
viscosity.
The Atrato Series 700 is capable of
monitoring flow over a range of 200
:1,
starting at 2 ml/min up to 20 lpm
with three different bore sizes. The
accuracy is better than
± 1.5%
of reading.
The simple design and
low-cost makes it extremely
appealing, while its USB computer
interface makes it easy to install
and use. The Atrato Series 700 has
standard a pulse output and a
programmable relay; analogue outputs
and integrated display is optional. |
|
|
|
|
|
 |
January
2010 |
The difference between the
industrial humidity / temperature
transmitter EE29 and EE31 is the
capability of the latter to
calculate other humidity related
values, like dewpoint temperature,
mixing ratio, wet bulb, etc. and to
have all these values simultaneously
available at the digital interface.
Considering the high demand of
digital interfacing nowadays it make
sense to simplify things and only offer
the humidity / temperature
transmitter Series EE31. The
same is true for the high-end
industrial humidity / temperature
transmitter twins EE32 and
EE3. Therefore, from the beginning
of this year the high-end and
multifunctional industrial
humidity / temperature transmitters are the Series EE33 and
EE31. |
|
|
|
|
|
 |
December
2009 |
The new condensation monitor EE46
can be mounted on pipes, walls,
ceilings, etc. The accurate,
reliable humidity sensor will
measure the relative humidity close
to the surface, by means of a
thermal coupling. If the relative
humidity exceeds 90 %RH a preset
switch will be triggered to provide
an early alarm that danger of
condensation is imminent. Counter
measures can be taken to prevent
such to happen. Series EE46 is
mounted in seconds and has an
excellent price / quality ratio. |
| |
|
|
|
 |
October
2008 |
New Field Mounted Ultrasonic
Flowmeters KATflow 200 and
KATflow 150...... The KATflow
150 is a redesigned and improved
ultrasonic flowmeter and replaces
the KATflow 110 and 140. The
KATflow 150 measurement
principle is based on transit-time
correlation. Its dual DSP-technology
and coded signals for better
measurement accuracy. The KATflow
150 is a wall mounted unit with
graphic display and either one or
two channels. A flow velocity range
of 0.01 to 25 m/s (2 to 5000
ft/min); a resolution of 0.25 mm/s
(0.05 ft/min) and a repeatability of
0.15% of measured value ± 0.015 m/s
(2.95 ft/min). |
| |
|
|
|
 |
October
2008 |
New Handheld and Portable Ultrasonic
Flowmeters KATflow 200 and
KATflow 230...... The KATflow
230 is a redesigned and improved
ultrasonic flowmeter and replaces
the KATflow 220. But more
important is the introduction of the
NEW Handheld Ultrasonic Flowmeter
KATflow 200. This KATflow
200 is the lighter version of the
KATflow 230, but equals its
performance, its accuracy and
repeatability. |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
Home
